Recently added

International Conference: Recent submissions

  • A Study on the effect of adjacent segments of a steel I-Beam with lateral supports on its critical moment 
    Pratiwi, Naomi; Wijaya, Paulus Karta (Universitas Gajah Mada, Hokkaido University danKarslruhe Institute of Technology. Yogyakarta., 2018)
    One of the most common failure modes in a steel beam structure is lateral torsional buckling (LTB). The unbraced length of the beam is a crucial factor for LTB analysis. The current formula to calculate the critical moment ...
  • Application of TRMM for runoff predictions in Ungauged basin, Case study: Nanjung Catchment 
    Wijaya, Obaja Triputera; Adidarma, Wanny Kristyanti; Riyanto, Bambang Adi; Yudianto, Doddi; Ramadan, Anri Noor Annisa; Mahran, Reva Al (Universitas Gadjah Mada, Yogyakarta, 2018)
    Rainfall-runoff models rely on reliable observation data in order to calibrate and verify the model parameters. Calibration and verification process are necessary because of the uncertainty of the watershed and mostly the ...
  • Flood control adaptation for massively residential land development in Bandung City 
    Yudianto, Doddi; Trisnojoyo, Randy Rivaldi; Marlim, Malvin Samuel (Universitas Gadjah Mada, Yogyakarta, 2018)
    According to the Statistics Indonesia, West Java is considered as one of the Indonesian provinces that belong to high category of Urban Rural Growth Difference for 2010-2015. The rapid urbanization especially in Bandung ...
  • Exploring factors of online consumer purchase decision towards Islamic fashion 
    Septina, Nina; Anggawidjaja, Agus Hasan Pura; Adriani, Leokadia Retno; Danil, Lilian; Davina, Sarah (Universitas Airlangga Surabaya, 2018)
    The development of the creative industry is currently receiving special attention from many parties, including the government and SME actors. One of the creative industry sub-sectors is fashion. Currently, the Islamic ...
  • Organizational culture and leadership, is there any relationship 
    Pratikna, Rizka Nugraha; Bestari K., Elaine Vashti; Mulia, Fernando; Gunawan, Ronny (The Economics Faculty of Parahyangan Catholic University, Indonesia, and Politeknik APP Jakarta (Ministry of Industry), 2018)
    The competitive market supported by dynamic environments, have always been the main reason to maintain sustainability in organizations. Every organization aims for the infinite period, therefore the people who work for the ...
  • Maturity level of Good Corporate Governance (GCG) principles implementation – case study from micro and small enterprises 
    Tan Lian Soei, Catharina; Setiawan, Amelia; Fitriani, Katlea; Satyarini, Ria (Fakultas Ekonomi Unpar, 2018)
    This study investigates the maturity level of Good Corporate Governance implementation in micro and small enterprises in West Java, Indonesia. We first identified five major good corporate governance indicators to ...
  • The Role of risk management disclosures in conforming bankruptcy risk calculated using Altman Z-Score (Study of coal companies in Indonesia) 
    Kurnia, Tanto; Yuniawati, Atty (FE UNPAR dan Politeknik APP Jakarta, 2018)
    This research aims to provide an overview of the financial condition of coal companies in Indonesia, so that it assists investors interested in coal industry in Indonesia. The research began with a preliminary study about ...
  • Service-performance chain: a triangle conceptual model 
    Septina, Nina; Widyarini, Maria (Fakultas Ekonomi Unpar, 2018)
    The service-profit chain demonstrates links between profitability, customer loyalty, and employee satisfaction, loyalty, and productivity. Previous research applied the service-profit chain among various sector research ...
  • The Future of accountancy profession in digital era 
    Fettry E.M., Sylvia; Anindita, Theresia; Wikansari, Rinandita; Sunaryo, Karsam (Economics Faculty Parahyangan Catholic University and Politeknik APP Jakarta (Ministry of Industry), 2018)
    The technology evolution is escalated rapidly. It has changed the business environment, including accountancy profession. Digitization makes various disruptive changes on accounting practices. Failure to keep pace with the ...
  • Creativity in capital management by Young Entrepreneurs in West Java SMEs 
    Barlian, Inge; Manurung, Elvy Maria (Fakultas Ekonomi UNPAR dan Politeknik APP Jakarta, 2018)
    The resilience of small and medium-scale businesses during the economic crisis is no longer doubted. While other companies with large capital collapsed due to the crisis, small and medium-scale business actually survived ...
  • The Application of management accounting in micro and small enterprise in Bandung and surrounding areas 
    Suryaputra, Verawati (Economics Faculty Parahyangan Catholic University and Politeknik APP Jakarta (Ministry of Industry), 2018)
    The purpose of this research is to investigate the application of management accounting at Micro Enterprises in Bandung area and to identify the management accounting methods or techniques that is used by Micro Enterprises ...
  • Preparation of biomass based carbon-sulfur composite cathodes in lithium sulfur batteries 
    Arie, Arenst Andreas; Kristianto, Hans; Cakan, Cakan, Rezan Demir (South Asia Institute of Science and Engineering (SAISE) and Tokyo University of Science. Tokyo, Japan, 2019)
    Initially, preparation of biomass based carbons was initially conducted by hydrothermal carbonization. As-prepared porous carbons were then utilized together with sulfur to form carbon-sulfur composites by using melt ...
  • Image feature extraction method to analyze soft-mode turbulence fluctuation in Nematic Liquid Crystal 
    Suryantari, Risti; Yusuf, Yusril; Flaviana (Chulalongkorn University, Thailand., 2019)
    A convective pattern called soft-mode turbulence (SMT) on MBBA (4'-Methoxy-benzylidene-4-butyl-aniline) nematic liquid crystal with a homeotropic alignment will appear when an external electric field with a certain frequency ...
  • Development of forex trading robot with money management 
    Abednego, Luciana; Nugraheni, Cecilia Esti (Higher Education, Sydney, Australia., 2018)
    There are three important factors to manage in forex trading: trading analysis, risk management, and money management. The previous paper [ABE17] develop some robots that can analyze forex market based on technical analysis ...
  • Enhancing the role of remittances through social capital 
    Pratikto, Rulyusa; Yazid, Sylvia; Dewi, Elisabeth Adyiningtyas Satya (Pusat Penyeliidikan Wanita dan Gender (Kanita), Malaysia., 2018)
    While a number of studies have argued that remittances have significant impact on reducing poverty, they have not been able to describe the transmission mechanism of remittance to poverty and inequality eradication. As a ...
  • Experimental study on the flexural behavior of composite shorea plywood – pine OSB floor panel 
    Vinsensia, Oluan; Suryoatmono, Bambang (Society of Wood Science and Technology and Japan Wood Research Society. Nagoya, Japan., 2018)
    The use of engineered wood products nowadays become more common due to the limitations of solid wood to meet the need for larger dimension and higher strength of wood as structural members. Composite wood floor panel ...
  • Improving the resistance starch of rice through physical and enzymatic process 
    Witono, Judy Retti; Halim, Janice Juliani (Chemical Engineering (ChEn) Society. Manila, Philippines., 2018)
    People with obesity and diabetes mellitus in Indonesia have increased in number from year to year. One of the reasons is caused by high glycemic index (GI) value in rice as our staple food. The GI of the rice ranged from ...
  • Eating and studying: New behavior in students learning 
    Manurung, Elvy Maria; Purwadi, Yohanes Slamet; Manurung, Elizabeth Tiur (University of Sri Jayewardenepura Sri Lanka & TIIKM. Kuala Lumpur, Malaysia., 2018)
    The presence of new cafes and restaurants over the last three years in the city have been emerging. These cafes and restaurants do not only serve food or drink but also provide the facility to hang-out, play and study, ...
  • A Metaheuristic approach for the vehicle routing problem with simultaneous pick-up and delivery (VRP-SPD) 
    Iswari, Titi; Budi, Stephen Sanjaya; Ariningsih, Paulina Kus (The University of Hong Kong (HKU), 2018)
    In the supply chain system, there are two types of logistic processes, those are forward and reverse logistics. One of the problems in the forward and reverse logistics process is to determine the optimal route of vehicles. ...
  • Quality of work life of elderly worker at small medium enterprise (A case study in Tofu Industry) 
    Damayanti, Kristiana Asih; Wijaya, Fabian; Yogasara, Thedy; Tesavrita, Ceicalia (International Labor Organisation (ILO), Ministry of Employment and Labor Korea, FKTU., 2018)
    Propose - This study was conducted by considering many elderly who still work in SME in Indonesia and increase every year. The study aims to measure Quality of Work Life (QWL) of elderly workers (above 60 years old) in ...
  • A Cultural way to nurture mutual understanding, education, and faith: a 63 year experiment 
    Rusli, Aloysius (Silliman University, Manila, Philippines., 2018)
    This time of terror and intolerance, including the upsurging of populism, can be considered to be a logical consequence of disregarding or neglecting the dignity of man. It should be borne with trust in the Lord and a ...
  • Double shear connection of Shorea Compression member using combined double-sided adhesive tapes and lag screws 
    Dharma, Adrian P.; Suryoatmono, Bambang (Forest Product Society, 2018)
    The use of double-sided adhesive tapes to resist shear force in a connection of wood compression member has the advantage of less construction time than the use of mechanical fastener such as lag screw because it is not ...
  • Tensile strength of Glulam connection with glued-in threaded steel rod 
    Ahmad, Daryan; Suryoatmono, Bambang (Forest Product Society, 2018)
    One possible way to make a connection in wood tensile member is by using glued-in threaded steel rod. The main objective in using this type of connection is to obtain a relatively high ductility. Another advantage of using ...
  • A two-item inventory-dependent demand model with return and all-units discount 
    Lesmono, Julius Dharma; Limansyah, Taufik; Loedy, Neilshan (East Asia Society of Industrial and Applied Mathematics, Tokyo, Japan, 2018)
    In this paper, we propose a two-item inventory model with deterministic demands, return and all-units discount. We consider a retailer who sells two products, where demands of these two products are deterministic and have ...
  • Benjina Onward: Global effort to combat human trafficking, forced labour, and illegal fishing 
    Sitanggang, Dyan Franciska Dumaris (Asian Law Institute (ASLI), National University of Singapore (NUS), dan Seoul National University (SNU). Seoul, South Korea., 2018)

Search UNPAR-IR


Advanced Search

Browse

My Account